Stop replacing your $300 suspension sleeve every month.
SleevSaver is a patented adhesive strip that wraps your socket's trim line — preventing the wear that destroys suspension sleeves. Get up to 5X the life from every sleeve, and save the average user $1,200+ per year.
- Up to 5X the sleeve life — the math works in one purchase cycle
- No more daily fiddling with creeping or shrinking sleeves
- Carried by Hanger Clinic, Cascade, and SPS
Your socket's trim line is destroying your sleeve. And costing you thousands.
Every amputee with an elevated-vacuum prosthetic knows this story. The trim line of your carbon-fiber socket — the sharp edge where the socket ends — presses against your suspension sleeve thousands of times a day. The fabric grinds against that edge. Eventually it wears through. A pinhole forms. Your vacuum seal fails. Your suspension drops. Your prosthetist orders another sleeve.
At $200 to $400 per sleeve and replacements every few weeks, the cost compounds fast. The average amputee burns through $4,000 to $6,000 per year in suspension sleeves alone. That's not a luxury problem — it's money disappearing from a budget that's already tight.
And it's not just the cost. Even before a sleeve fails completely, you spend half your day fighting it. The sleeve creeps up your residual limb. Or shrinks down toward the bottom of the socket. You're constantly reaching down, adjusting, fiddling with a Velcro strap to keep it in place. Every time you stand up, every time you walk — it's another small thing to manage.
And the worst part: every replacement sleeve breaks down the same way. The cycle doesn't end. It just keeps costing you, and keeps demanding your attention.
Every amputee with elevated vacuum knows this story.
The trim line of your carbon-fiber socket — the sharp edge where the socket meets your leg — grinds against your suspension sleeve thousands of times a day. A pinhole forms within weeks. Your vacuum seal fails. The sleeve has to be replaced.
And the worst part: every replacement sleeve breaks down the same way. The cycle doesn't end on its own. The trim line keeps grinding. The pinholes keep forming. The vacuum keeps failing.
Introducing The Pinhole Seal™.
Other products try to make sleeves more durable. SleevSaver does something different: it eliminates the surface that's destroying them.
Introducing The Pinhole Seal™ — a Different Way to Solve the Problem.
Other products try to make sleeves more durable. SleevSaver does something different: it eliminates the surface that's wearing out your sleeve in the first place — by wrapping a smooth, protective barrier around your socket's trim line.
No abrasive edge. No friction. No more pinholes. Your sleeve lasts up to 5X longer.
A precision adhesive strip is wrapped around the trim line of your socket — the edge that's been wearing out your sleeves. Takes seconds. No tools required.
The strip transforms your socket's sharp trim-line edge into a smooth, continuous surface. Your sleeve glides over a friction-free zone instead of grinding against an abrasive edge.
Vacuum stays sealed. Suspension stays solid. Your sleeve stops creeping. Stops shrinking. Stops failing. The sleeve you'd be replacing in 30 days lasts 3 to 5 months.
Bill applies SleevSaver in under 60 seconds.
Figure out exactly what SleevSaver will save you.
Your savings calculator
Two inputs. Real number. The average user saves $1,200+ in their first year.
Figure out exactly what SleevSaver will save you.
SleevSaver costs $39.99. The average user saves $1,200+ in their first year.
Save My Sleeves — $39.99Your savings calculator
Two inputs. Real number. The average user saves $1,200+ in their first year.
"Was hesitant about the price. Now I get it."
"The trim line on my socket would always wear a tiny pinhole in my sleeve within a month or two, killing my vacuum. I was hesitant about the price. Now I get it. The math works in one purchase cycle."
"Was hesitant about the price. Now I get it."
"The trim line on my socket would always wear a tiny pinhole in my sleeve within a month or two, killing my vacuum. I was hesitant about the price. Now I get it. The math works in one purchase cycle."
Compatible with virtually every elevated-vacuum setup.
SleevSaver was designed to work across the major sleeve brands and socket configurations used in the U.S. prosthetics market.
Any elevated-vacuum or suction suspension setup. Below-knee + above-knee. If your socket has a trim line and uses elevated-vacuum or suction, SleevSaver was designed for it.
Compatible with virtually every elevated-vacuum setup.
SleevSaver was designed to work across the major sleeve brands and socket configurations used in the U.S. prosthetics market. Whether your sleeve is from Ottobock, Willow Wood, ALPS, or another major manufacturer, the trim-line wrap mechanism works the same way.
Try SleevSaver risk-free. Pick the pack for you.
- 1 SleevSaver strip
- Application instructions
- 30-day money-back guarantee
- Ships in 24 hours
- Multi-pack — 12 rolls, lower cost per roll
- Maintains vacuum seals and cushions socket brim
- Free shipping included
- 30-day money-back guarantee
Send it back. No questions.
If SleevSaver doesn't work for your setup, send it back within 30 days for a full refund. We're confident enough that we're willing to take the risk so you don't have to.
Questions worth asking.
Trusted by the prosthetics industry, used by amputees nationwide.
Save your sleeves. Save your money. Save the cycle.
Try SleevSaver for 30 days. If it doesn't work for your setup, send it back. No questions.
Save My Sleeves — $39.99Get the launch list.
Be first to know when new products drop, plus practical tips for daily prosthetic life — written by amputees, for amputees.